Dscf0098.jpgMarking out for bow61 viewsImage shows the V tip with pencil, and the inner 3/4 inch line V notch is also visible.
|
|
Dscf0099.jpgBow jig77 viewsall finally wedged, glued and clamped
|
|
DSCF0129.JPGClamping69 viewsThe setup was placed on a flat floor with weights for 2 weeks in this configuration...
|
|
Pb050070.jpgTrimming76 viewsReady for trimming the profile,note the jigsaw surplus drop offs on the floor
|
|
Pb070044.jpgRibs87 viewsAll done!
|
|
Pb090052.jpgShaper68 viewsCheap Shaper: Just a box with my router screwed up underneath
|
|
Pb090056.jpgBows85 viewsAll the bows ready for final sanding, which I will leave until they're ready for attaching to the wings
|
|
Pb090057.jpgNasty cup74 viewsDont use styrofoam cups with Clearcoat! [polystyrene to us Brits]
|
|
Pict0900.jpgRibs lower116 viewsAll done
|
|
Pict0902.jpgTrimming84 viewstrimming the lightening holes
|
|
Pict0903.jpgTemplate75 viewsShaping ready for the aileron well area ribs
|
|
tipbows.jpgBow jig drawing150 viewscourtesy EAA website somewhere
|
|
|
|
